3. APOGEE - ADVANCED ACRYLIC WATER BASED COATING - 1 GALLON

Item #
3301
Price
$129.95
Sale Price
$119.95
You Save
You Save: 8%
Options
Quantity:
  • Description
Available Color Options

Apogee Advanced Acrylic Coating For Wood & Concrete


Apogee covers approximately 300 square feet per gallon; 2 coats needed for proper application - There is no primer needed - This is a self priming water based paint!

Apogee is a premium one-part acrylic water-based paint designed as an effective weapon against weathering that is easy to apply and clean up. Get the longest lasting protection against fading on painted or unpainted wood and concrete surfaces.

Apogee is more than a paint -- it's closer to being a coating! That's because it penetrates wood or concrete to provide a cooler, slip-resistant surface. Also, it is resistant to peeling and chipping for years. Dries quickly, is durable, and resists fading either by chemicals and/or abrasion. Cleans up with soap and water. Designed for maximum protection against algae, UV rays and chlorine.
 

  • USE ON BOTH PAINTED AND UNPAINTED WOOD OR CONCRETE SURFACES
  • CAN BE APPLIED TO DAMP SURFACES
  • EASY CLEAN UP -- USE SOAP AND WATER
  • CHLORINE, MILDEW AND UV PROTECTION
  • SAFE SLIP RESISTANT FINISH
  • QUICK DRYING TIME
  • ODOR FREE
  • KEEPS ITS COLORS FOR MULTIPLE SEASONS
  • 10 YEAR WARRANTY


SURFACE PREPARATION: Concrete surfaces must be cleaned using a solution of 50% muriatic acid mixed with 50% water. After surface has been rinsed, follow up with a mixture of TSP powder (Tri Sodium Phosphate) and water. Rinse thoroughly and allow surface to dry for 24 hours.

NOTE: If you are coating steel or wood then skip the first step and only clean the area thoroughly with TSP and water and allow to dry for 24 Hours. Glossy or porous surfaces can be sanded using 80 grit sand paper for proper adhesion.

SUGGESTED USES: Painted or unpainted wood or concrete surfaces.

FINISH: Matte.

VEHICLE TYPE: Acrylic Resin

SOLIDS BY WEIGHT: 50%

WEIGHT PER GALLON: 11 lbs. per gallon (varies by color)

VISCOSITY AT 75°F (24°C): 70-80 KU AVERAGE DRY TIME 75°F: Dries to touch in 6 Hours. Second coat be applied within 12-24 hours. Allow 2 days for complete cure before putting back in service.

RECOMMENDED CLEAN UP: Soap & Water

RECOMMENDED PRIMERS: Self Priming

APPLICATION: Brush, Spray or Roller (preferred) Roll: 3/8” nap mohair or lambskin roller. Keep roller wet. Roll in one direction, re-wet, then cross roll.

Spray: Conventional Air 50 -70 psi, Tip Size .055 -.070, Airless 2200- 2500 psi, Tip Size .019-.023.

POT LIFE: Not Applicable

LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F.

SHELF LIFE: Minimum 12 months

MIXING: Thoroughly mix the paint for 10 minutes, apply as it comes from the container.

PACKAGE: 1 Gallon can

eCommerce software powered by SolidCactusEcommerce