1. PLATINUM ULTRA - 2 PART EPOXY POOL PAINT 1:1 MIX (2 GALLON KIT)

Item #
2097
Price
$279.95
Sale Price
$209.95
You Save
You Save: 25%
Options
Quantity:
  • Description
Available Color Options

Platinum Ultra - 2 Part Epoxy Pool Paint:

"THE PRESENT AND FUTURE OF EPOXY POOL PAINTS!"

Platinum Ultra is our very best, highest solids, industrial grade 2-Part Epoxy Pool Paint

It is formulated with the highest quality ingredients and designed to provide your pool with long lasting beauty, maximum durability and UV protection, based on our years of experience, research and commitment to excellence.

With its heavy duty 1:1 mix ratio, Platinum Ultra has a much higher solids by weight content than most other pool paints and epoxy and is ideal for new, old and previously painted pools. It will leave your surface with a magnificent smooth finish. And because of its solids content, along with the supreme quality of ingredients in its formulation, there is no primer necessary before application, it is a self priming material. This is why Platinum Ultra can be applied over existing pool coatings such as acrylics, epoxy and rubber based coatings, as well as on all types of bare concrete, plaster, gunite and fiberglass. Most importantly it is the reason why it is designed to provide a longer lifespan than other pool paints.

At 93% solids, Platinum Ultra can also be used as a cost effective alternative to having to re-plaster your pool! It provides incredible durability and leaves a "shield' of UV protection on the surface to protect against the sun and its harsh weathering effects. Platinum Ultra also dries quickly and resists fading either by chemicals and/or abrasion. It is designed for maximum protection against algae, automatic pool cleaning machines, saltwater and chlorine. Take a step up today and use a premium product that will protect your pool for years to come!

Coverage is approximately 400 sq. ft. per 2 gallon kit. Two (2) coats are strongly recommended for proper application and performance - No Primer Needed - This is a self priming paint

To determine the amount of epoxy pool paint needed: Length of Pool x Width of Pool x 1.7 = square footage x 2 (2 coats) Divided by 400 = kits needed (remember that this product is sold in a 2 gallon kit)
 

  • UNPARALLELED UV PROTECTION
  • GREAT FOR CONCRETE AND PLASTER
  • EXCELLENT FOR FIBERGLASS AND GUNITE
  • A GREAT ALTERNATIVE TO RE-PLASTERING
  • CHLORINE AND SALTWATER RESISTANT
  • HIGHEST SOLIDS EPOXY FOR MAXIMUM DURABILITY
  • CAN ALSO BE USED ON FOUNTAINS AND PONDS
  • LEAVES A BRAND NEW UNIFORM FINISH
  • EXCELLENT COLOR RETENTION
  • 20 YEAR WARRANTY


SUGGESTED USES: Concrete, plaster, gunite and fiberglass pools, as well as spas, fountains, ponds etc.

COLORS: White, Medium Blue, Aqua, Royal Blue, Sky Blue, Black

COVERAGE: 400 sq. ft. per 2 gallon kit. Less coverage will occur on bare, rough, or sandblasted surfaces. 2 coats are strongly recommended for maximum durability and product lifespan. Be sure to calculate this into your projected quantities needed to paint your pool surface before starting.

FINISH: Glossy. For additional slip resistance on areas such as the pool steps or diving board platforms, Silica Sand can be added to the product during application to achieve desired texture.

SURFACE PREPARATION: Power wash or hose the surface to remove all loose paint, dirt, oils, suntan lotions and grease. Clean the pool with a mixture of Tri-Sodium Phosphate (TSP) and water, scrubbing the surface thoroughly. Next etch the area with a solution of 50% muriatic acid and 50% water. Then thoroughly clean again with TSP & flush with plenty of fresh water. Allow the surface to dry for 24 Hours. Glossy surfaces can be power sanded using 80 grit sandpaper if desired. After applying the first coat, allow it to dry for at least 24 hours before applying the 2nd coat. After the second coat is applied wait 5 days to refill the pool with water. If it should rain at any time during application, add an extra day of curing time for each day of rain. That's it! You're Done!!

SOLIDS BY WEIGHT: 93%

WEIGHT PER GALLON: 12.8 lbs. per gallon (varies by color)

RECOMMENDED DRY FILM: 4-6 mils

VISCOSITY AT 75°F (24°C): 120-140 KU (mixed). If necessary you may add 6-8 ounces of Xylene per 2 Gallon Mixture if you wish to thin material for easier roll-out performance.

AVERAGE DRY TIME 75°F: Dries to the touch in 10-12 hours. Lower temperatures & higher humidity will slow down dry times. Re-coat with no sanding required after allowing at least 24 hours for the first coat to cure. After the second coat is complete, allow a minimum of 5 days of drying time to ensure that the material is completely cured before filling the pool with water. If it should rain, add 1 extra day of drying time for each day of rain.
 

WAIT 5 DAYS AFTER FINAL COAT BEFORE FILLING POOL WITH WATER.



RECOMMENDED REDUCER: If necessary, you may add 6-8 ounces of Xylene to each 2 gallon mixture as needed for easier roll-out performance.

RESISTANCE TO: Chlorine, Chemicals, Algae, Mineral Oils, Fresh and Salt Water

RECOMMENDED PRIMERS: This is a self priming material.

APPLICATION: Brush, Spray or Roller (preferred)

Roll: 1/2” or 1” nap, lambskin, mohair or phenolic core roller. Keep roller wet. Roll in one direction, re-wet, then cross roll.

Spray: Conventional Air 50 -70 psi, Tip Size .055-.070, Airless 2200- 2500 psi, Tip Size .019-.023.

LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F. NOT FOR VINYL LINED POOLS.

SHELF LIFE: Maximum 12 months

MIXING: Mix both PART A & PART B individually for at least 5 minutes either mechanically or by hand, and then mix the combined volumes (1:1 Mix Ratio) for at least 5 minutes. Allow the mixed solution to rest for a maximum of 5-7 minutes and then begin using. Mix only what you expect to use in a 2 hour period.

POT LIFE: 2-3 hours. Higher temperatures will substantially shorten the pot life. Only mix enough Part A (Base) and Part B (Activator) that you will use within a 2 hour time.

PACKAGE: 1 Gallon Cans (2 Gallons Per Kit)

eCommerce software powered by SolidCactusEcommerce