6. POOL PROTECT - ACRYLIC POOL PAINT - 1 GALLON

Item #
2077
Price
$145.95
Sale Price
$109.95
You Save
You Save: 25%
Options
Quantity:
  • Description
Available Color Options

Pool Protect

Pool Protect is our premium acrylic pool paint designed to provide great protection against chlorine, algae, chemicals and UV rays. It is formulated with a blend of stabilizers that help to resist fading while also preserving the life of your concrete or plaster pool.


FOR CONCRETE AND PLASTER POOLS

Approximate coverage is 300 square feet per gallon. 2 coats are needed for proper application - No primer needed - This is a self priming swimming pool paint

Pool Protect is very effective against chlorine and algae, and has excellent color retention. It's easy to use and produces great results.

  • COMES IN SEVERAL COLORS
  • DURABLE AND EASY TO USE
  • GOOD FOR CONCRETE AND PLASTER POOLS
  • UV PROTECTION
  • CHLORINE RESISTANT
  • 8 YEAR WARRANTY

COLORS: Available in White, Medium Blue, Aqua, Royal Blue, Sky Blue, and Black

COVERAGE: Approximate coverage is 300 square feet per gallon. Recommended thickness will require 2 full coats. Expect less coverage on previously painted, rough, porous or sandblasted surfaces.

To figure out the amount of paint you will require: Length of Pool x Width of Pool x 1.7 = square footage x 2 (2 coats) divided by 300 square feet = gallons needed

SURFACE PREPARATION: Power wash or hose the surface to remove all loose paint, dirt, oils, suntan lotions and grease. Clean the pool with a mixture of Tri-Sodium Phosphate (TSP) and water, scrubbing the surface thoroughly and then rinse with water. Next etch the pool with a solution of 50% muriatic acid and 50% water. Then clean again with TSP & flush with plenty of fresh water. Allowed the surface to thoroughly dry for at least 24 hours. Glossy surfaces can be power sanded using 80 grit sandpaper if desired. After applying the 1st coat, wait at least 24 hours before applying the 2nd coat. AFTER APPLYING THE FINAL COAT, WAIT 5 DAYS BEFORE FILLING THE POOL WITH WATER. If it rains at any time during or after application, allow one extra day of cure time for each day of rain.

SUGGESTED USES: Concrete, Gunite or Plaster Pools. For Fiberglass Pools, Spas, or Jacuzzi's, see our Epoxy Pool Paints.

FINISH: Glossy. For a more slip resistant finish, silica sand can be added to areas such as the pool steps or diving platforms to achieve desired texture.

SOLIDS BY WEIGHT: 50%

WEIGHT PER GALLON: 11 lbs. per gallon (varies by color)

VISCOSITY AT 75°F (24°C): 70-80 KU

AVERAGE DRY TIME 75°F: Dries to the touch in 12 hours. Second coat can be applied after allowing the first coat a minimum of 24 Hours to dry. Allow 5 days after application of the second coat before filling the pool with water. If it rains at any time during application add 1 extra day of cure time for each day of rain.

RECOMMENDED REDUCER: 3-4 ounces of Xylene can be added to each gallon of paint if necessary for easier rollout performance.

RECOMMENDED CLEAN UP: Xylene

RESISTANCE TO: Chlorine, Alkali, Algae, Mineral Oils, Fresh and Salt Water

RECOMMENDED PRIMERS: Self Priming

APPLICATION: Brush, Spray or Roller (preferred) Roller: 1/2 inch” nap, mohair, lambskin or phenolic core roller. Keep roller wet. Roll in one direction, re-wet, then cross roll.

Spray: Conventional Air 50 -70 psi, Tip Size .055 -.070, Airless 2200-2500 psi, Tip Size .019-.023.

POT LIFE: Not Applicable

LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F. NOT FOR VINYL LINED OR METAL POOLS.

SHELF LIFE: Maximum 9 months

MIXING: Mix each gallon either mechanically or by hand for 10 minutes and then apply as it comes from the container.

PACKAGE: 1 Gallon Can

eCommerce software powered by SolidCactusEcommerce