3. DIAMOND - HIGH SOLIDS CHLORINATED RUBBER POOL PAINT 1 GALLON

Item #
2091
Price
$179.95
Sale Price
$149.95
You Save
You Save: 17%
Options
Quantity:
  • Description
Available Color Options

DIAMOND HIGH SOLIDS RUBBER POOL PAINT

(GOOD FOR CONCRETE AND PLASTER POOLS)

Diamond High Solids Rubber Pool Paint covers approximately 300 square feet per gallon; 2 coats needed for proper application - There is no primer needed - This is a self priming paint!

This is our top of the line, extended life, chlorinated rubber pool paint. Our Diamond High Solids Rubber Pool Paint provides extended life to your pool's surface by utilizing a unique blend of solids and UV stabilizers that act like a "sunblock" which helps slow the effects of harmful UV rays. With its heavy volume of solids, this premium Type A pool paint also provides extended waterproof protection against chlorine and chemicals. It is excellent for both new or old concrete and plaster pools, comes in a variety of colors and can be applied over bare surfaces as well as pools that were painted with an existing acrylic or chlorinated rubber paint. It also dries quickly, is very durable, and resists fading, chemicals and abrasion. Re-energize your pool today with the "DIAMOND" standard in the industry, and enjoy it for years to come!
 

  • EASY TO USE
  • COLORS RETAIN VIBRANCY FOR YEARS
  • DRIES QUICKLY
  • NON-FADING
  • GREAT FOR RE-COATING
  • STRONG UV PROTECTION
  • RESISTANT AGAINST CHLORINE
  • 10 YEAR WARRANTY


FOR CONCRETE AND PLASTER POOLS ONLY - FOR FIBERGLASS OR SPAS, SEE OUR EPOXY POOL PAINTS


COLORS: Available in White, Medium Blue, Aqua, Royal Blue, Sky Blue, or Black

COVERAGE: Coverage is approximately 300 square feet per gallon. 2 full coats are strongly recommended for maximum durability and product life. Expect less coverage on bare, rough or sandblasted surfaces.

To figure out the amount of paint you will require: Length of Pool x Width of Pool x 1.7 = square footage x 2 (2 coats) divided by 300 square feet = number of gallons needed

SURFACE PREPARATION: Power wash or hose the surface to remove all loose paint, dirt, oils, grease and suntan lotions. Clean the pool with a mixture of Tri-Sodium Phosphate (TSP) and water, scrubbing the area thoroughly. Next etch the surface with a solution of 50% muriatic acid and 50% water. Then thoroughly clean again with TSP & and flush with plenty of fresh water. Allow the surface to dry thoroughly for at least 24 hours before beginning application. Glossy surfaces can be power sanded using 80 grit sandpaper if desired. After applying the 1st coat, wait at least 24 hours before applying the 2nd coat. WAIT 5 DAYS AFTER THE FINAL COAT BEFORE FILLING THE POOL WITH WATER. If it should rain at any time during application, allow one extra day of cure time for each day of rain.

SUGGESTED USES: Concrete or plaster pools. DO NOT USE on spas, whirlpools or fiberglass. For those applications see our Epoxy Pool Paints.

FINISH: Glossy. For a more slip resistant finish on area such as the pool steps or diving areas, silica sand can be added to the paint as needed to achieve the desired texture.

VEHICLE TYPE: Chlorinated Rubber

SOLIDS BY WEIGHT: 70%

WEIGHT PER GALLON: 11 lbs. per gallon (varies by color)

RECOMMENDED DRY FILM: 4.0 mils

VISCOSITY AT 75°F (24°C): 70-80 KU

AVERAGE DRY TIME 75°F: Dries to the touch in 12 hours. Lower temperatures & higher humidity will slow down dry times. Second coat can be applied after allowing the first coat a minimum of 24 hours to dry. Wait 5 days after applying the second coat to allow for a complete cure before filling the pool with water. If it should rain at any time during the curing process, add 1 extra day of cure time for each day of rain.

RECOMMENDED REDUCER: If necessary 3-4 ounces of Xylene can be added to each gallon as needed for easier rollout performance.

RESISTANCE TO: Chlorine, Alkali, Algae, Mineral Oils, Fresh and Salt Water

RECOMMENDED PRIMERS: Self Priming

APPLICATION: Brush, Spray or Roller (preferred) Roll: 1/2” nap mohair, lambskin or phenolic roller. Keep roller wet. Roll in one direction, rewet, then cross roll.

SPRAY: Conventional Air 50 -70 psi, Tip Size .055-.070.

AIRLESS: 2200-2500 psi, Tip Size .019-.023.

POT LIFE: Not Applicable

LIMITATIONS: Do not apply if material, substrate or ambient temperature is below 40°F or above 95°F. NOT FOR VINYL LINED OR METAL POOLS.

SHELF LIFE: Maximum 9 months

MIXING: Mix the paint either mechanically or by hand for 10 minutes, and then apply as it comes from the container. If necessary, material can be thinned using 3-4 ounces of Xylene in each gallon for easier rollout performance.

PACKAGE: 1 Gallon Can

eCommerce software powered by SolidCactusEcommerce